Design Comfort Blog: Posts Tagged ‘Furnace Maintenance’

Why the Beginning of Spring is a Great Time for Furnace Maintenance

Monday, April 18th, 2016

One of the biggest misconceptions about HVAC system maintenance is that you have to do it at a particular time of the year. This is not true: as long as you are having your system maintained on a regular basis, the time of year does not matter. However, there are certainly benefits to having furnace maintenance done near the end of the heating system. We’ve explored a few reasons why below.

Continue Reading

Heating Tip: What Makes a Furnace High Efficiency?

Monday, October 15th, 2012

You’ve probably heard about the new lines of high efficiency furnaces being released by popular home heating companies, but what exactly is different about these high efficiency devices from your current furnace? Let’s take a closer look at what a high efficiency furnace offers and why it can save you money.

Added Features

A high efficiency furnace uses familiar technology in a new way to reduce the amount of energy lost when combustion takes place. This means:

  • Sealed Combustion – Instead of open combustion which allows heat to escape during and after the combustion process, a high efficiency furnace uses a sealed chamber with carefully measured and fed airflow to burn fuel and produce heat. Exhaust heat can then be recaptured and used to heat air transferred to your air vents.
  • Two Stage Gas Valves – With a two stage gas valve, your furnace can respond to the temperature outside. There isn’t just one “on” switch. The furnace will regulate gas flow based on how much energy is needed to produce heat for your home. So, if there is a sudden burst of cold outside, the furnace will respond accordingly, but for most days when heating needs are low, it will use only the minimum amount of needed gas.
  • Programmable – High efficiency furnaces are now programmable, meaning you can set specific time limits for operation, change thermostat settings digitally and inspect the device through an electronic read out. The level of control given to you by a programmable high efficiency furnace can greatly reduce gas or electricity consumption.

Cost Benefit

The real reason many people are interested in high efficiency furnaces is that they are so much less expensive to operate. Instead of costing hundreds of dollars to run through the winter, they operate the bare minimum needed to heat your home. Using up to 95% of the fuel they consume to produce heat and regulating gas to cut how much is consumed during milder days, these furnaces are built to save you money.

If you have an old furnace that chews through energy like nobody’s business, now might be the time to consider the benefits of a brand new, high efficiency model.

Over the years, Design Comfort has provided Salt Lake City with quality heating services. Contact us today!

Continue Reading

$35 Furnace Tune-up!

Wednesday, December 7th, 2011

If you have not had your annual maintenance visit, now is a great time! Design Comfort is offering a $35 furnace tune-up, usually $79! This tune-up includes everything you need to make sure your furnace is operating safely, such as a gas leak check, draft check, furnace check, and all furnace safeties. Keep your family safe and warm this winter, and do so at an incredible price!

And we have an even better deal too: get a FREE Furnace Safety Inspection with the purchase of our annual maintenance plan. Annual maintenance will keep your heating and cooling system working at peak efficiency and cut down on future repairs. Our Priority One Maintenance Program will also get you preferred service, 20 % off parts and repairs, and no after-hours charge.  Don’t miss out on either of these great deals, call Design Comfort today!

Regular Hours Only. Not available with any other promotions or offers.

Continue Reading

How to Get Your Furnace Ready for Winter

Wednesday, October 26th, 2011

Being cold in a Utah winter is normal – as long as you are outside. But you shouldn’t be cold inside your own home. If that happens, the first place to look to is your furnace, which may not be working correctly. Furnaces are like any other piece of mechanical equipment. They need to be maintained and serviced on a regular basis to ensure they are working at peak efficiency and warming your entire home at your desired comfort level.

The best time to get your furnace ready for winter is not during the cold winter months – it is before the winter season even begins. There are several way to get your furnace ready for winter and let’s explore some of them.

First of all, check and see when you last had your furnace serviced. If it has been over one year ago, you should schedule and maintenance inspection from your local qualified heating and cooling professional. And when you make that appointment, ask about service agreements and getting on a regular maintenance schedule. Most heating and cooling contractors offer service agreement plans which include furnace and air conditioning check-ups on an annual basis.

Okay, so you know who to call for maintenance but what can you do yourself? First of all, give your furnace a little “help” by checking the vents and returns throughout the house. Ensure that there are no obstructions or blockages such as rugs, clothing, furniture, etc. You need to have unobstructed paths for your heated and return air to flow. The more congested the path, the harder your furnace will have to work. And while you’re at it, make sure your vents are open or closed, depending on how much you use your rooms. For example, if you have an extra bedroom that doesn’t need to be heated, closed off the vent or close the damper in the ductwork. The heated air will be diverted to other parts of your home where it is needed.

You can also help the airflow by vacuuming the vent cover or removing it and vacuuming any of the ductwork that you can easily get to. For a more thorough job consider calling a qualified and professional duct cleaning contractor. Many heating and cooling contractors also offer duct cleaning service, too.

Another maintenance function that you can perform is cleaning or replacing the furnace filter. Depending on the size of your home and its air quality (occupants, pets, etc.), you may want to clean or replace your air filter every one to three months. A dirty filter can restrict airflow and can put contaminants like dirt and dust right back into your air system. If you don’t know how to replace your air filter, consult the furnace owner’s manual or go online to learn more. If your furnace uses an electrostatic air filter, it will need to be removed and cleaned, either by using a hose or with soapy water and a hose. Make sure you let it dry before re-installing it.

You may also want to inspect any electrical wires around your furnace to ensure none are broken or frayed. A visual inspection should be good enough.

Once you have done what you can, let your heating and cooling professional take over from there. They are licensed and trained to inspect your furnace and ensure that it is in peak operating condition. And do it today – while everyone else is waiting.

Continue Reading

Why Fall Maintenance is Important for Your Heating System

Wednesday, October 19th, 2011

When it comes to heating equipment maintenance and repairs in your Utah home, it does not pay to procrastinate. The longer you put off the maintenance, the higher the probability that your heating system will break down or your heating and cooling contractor will be unable to make an emergency repair when you need it. That’s why fall is the best time of the year to have maintenance and repair procedures performed.

Consider this: when do most people call a heating and cooling contractor? The answer: when they need a repair. The call could come in the middle of the night when a furnace stops working or during a family party on a weekend – both times when it is hard to find someone to do the repair work. Has this happened to you? If so, there are ways you could have prevented this from happening – and could have saved from cold nights and embarrassing situations with house guests.

You can avoid this aggravation and extra expense by scheduling fall maintenance for your heating system. Fall is often the “slow season” for heating and cooling professionals and many schedule their routine service and maintenance appointments during this time.

Most heating and cooling contractors offer service or maintenance agreements, which lock in at least one or two visits a year for furnace or air conditioner inspection. It is rare to find a contractor who will schedule a furnace inspection during the cold winter months. They know that time is usually saved for people with real emergencies. If you don’t have a service agreement with a contractor, you may want to consider signing up for one and avoid the risk of waiting in line for a furnace repair in the dead of winter.

During fall maintenance, your heating equipment will be switched on and inspected. That may sound routine but by running your heating system early, you may be spared the expense of repairing your system when it fails to operate or run smoothly during the cold months. If there is a problem, it is better to fix it ahead of time.

There is no guarantee that a furnace that is tuned up in the fall will last throughout the winter without needing service. But a little preventive maintenance ahead of time will save a lot of heartache – and dollars – when a real emergency comes up.

Continue Reading